How To Restore Color On Black Leather Seats

• 

Before-After leather jacket restoration

HOW TO RESTORE LEATHER JACKETS?

Leather jacket colour restoration technique

Introduction

Most leather jackets are made of lambskin; very soft and supple leather that could too be said to be "porous". There is no protective coating to preclude the dye and restoration ingredients from penetrating deep into the leather. This is why the restoration method beneath works so well for the vast majority of leather jackets! Also, dark colors are easier to restore. In other words, the color restoration of blackness lambskin jackets is the most common restoration project and they are the easiest to restore! However, this method has also been used successfully to restore various other leather manufactures such as leather numberless, gloves and piece of furniture, in a broad range of colors and types of leather.

Before you begin

What you'll need:

Preparation:

• Read this article from meridian to bottom, including notes and watch the video tutorial.
• Await for any clay spots that would prevent the dye from penetrating leather.
  If present, see Additional information 1.
• Inspect the leather for signs of "sunday burn" e.g. shiny washed out color. (Additional information five.)
• For a black jacket, y'all just use COSTA BRAVA blackness dye. But if you lot demand to brand your own custom dye color, COSTA BRAVA is available in many colors including all chief colors, white, black and clear. Mixing these, y'all tin can brand any colour! See color swatch hither.
• Set up upwards where you can freely movement the jacket without spilling the dye.
• If needed, use tape to comprehend the buttons and other areas.

The restoration method

Let's get downward to business! This method has two parts (A) first you restore the leather then (B) y'all protect it.

1. Restoration
   
   1. Put 5 ml of Lanolin (liquid Grasso) in a basin.
   2. Shake your COSTA BRAVA dye bottle thoroughly and mix about xxx ml of COSTA BRAVA dye with the oil. Add near 30 ml of TENDERLY. Shake URAD jar thoroughly then add 30 ml of URAD. Mix well.
   3. Exam 1st glaze on an inconspicuous area first. (See Additional information 5.)
   4. Evaluate if whatsoever conditional steps apply or if adjustments need to be made to the recipe. (Run across Boosted data ii.)
   5. Utilise 1st coat, one patch of leather at a time. (See Additional information 3.)
   6. Employ a second coat if needed.
   7. Hang to dry for a few hours. The restoration should at present exist complete. If not, and this is rare, it may be necessary to utilise nonetheless some other blanket. Otherwise, move on to the protection step.
2. Protective Glaze
   
   1. Apply SAHARA: Preferably outdoor or in a well-ventilated expanse and preferably wearing a mask, spray a sparse layer of Sahara on the jacket. Hang to dry for viii hours without moving the jacket. For longer lasting upshot, echo this step once.

Boosted Data

1. If leather is dingy, clean it using AQUILA leather cleaner (non included in kit). Spray Aquila and gently wipe. Let dry for fifteen to twenty minutes. Repeat if necessary.
   If information technology is a light colour jacket and there are spots with no color left at all, employ COSTA BRAVA on these spots showtime, and so clean with Aquila otherwise these spots may darken.
2. Recipe adjustment examples (for step A.4): The leather looks too tedious: Add xxx to l ml of URAD to add more shine or use less Grasso oil. It feels potent: Add 30 to 50 ml of TENDERLY.
3. As you employ the restoration mix, you may come beyond very discolored areas. On blackness leather jackets for example, the color damaged spots will be visible equally grayish to almost white areas. To fully restore colour to these very damaged spots, you lot may need to apply pure COSTA BRAVA dye first, and without letting the dye dry, go over that same spot over again with the restoration mixture (As shown in the video tutorial).
4. Repairs, such as patching up a tear, can exist done before restoration. However, the irresolute of the lining is all-time done after restoration.
5. If in your exam (in step A.3) the dye does not seem to penetrate the leather, you lot can suspect "Burned leather". Lord's day, torso grease, silicon and hair spray (among other things) tin can "burn" leather preventing the dye from properly penetrating. In that case, adding CAMOSCIO PRO (Liquid version of CAMOSCIO, non included in the restoration kit) to the dye mixture may work. It'south worth a shot considering if that does non piece of work, we know of nothing else that does.

Restore leather jacket, boots, pants and more

Notes:

• This method is not for changing the color of your leather. It is a colour restoration process.
• This restoration process is non the regular maintenance of leather jackets. Read How to care for leather jacket commodity.
• Don't worry if your dye color is not an verbal perfect lucifer. The colour pigments will blend-in past penetrating the leather then information technology will non be noticeably unlike if it is simply slightly off.
• Don't forget to buy the COSTA BRAVA dye equally it is not included in the Color Restoration kit.
• Quantities given here are for a short jacket. Nonetheless, these will vary widely from one jacket to the other, depending on the blazon of leather and how much product it absorbs. 50 to 100 ml of the final Costa-Brava dye color is enough for 1 jacket.
• Examination on a less visible part of the article at every step of the mode.
• Six to twelve months after the restoration is completed, you can use URAD and TENDERLY every bit regular conditioning and maintenance, as described in the article How to care for leather jackets?

Decision

Leather is a very noble material and has incredible longevity, provided it is well cared for! Using this method, you lot tin can requite a new life to your leather. It could be one-time and otherwise lost, it could be only slightly discolored, information technology could be worth thousands of dollars or take sentimental value... Either mode, using these simple steps and with simply minimum effort, in most cases, you lot will end up with your leather looking new again!

Source: https://www.urad.com/en/faq/colour-restoration-technique

Posted by: boykincasent.blogspot.com

Share this post